Faulty Station Line (Event Type)
From Zenitel Wiki
Event description
Event Owner: | A station or an UDP group |
Event type: | 13 - Faulty station line |
Subevent: | N/A |
When change to ON: | When this station's line monitoring has found a problem or if the whole ASLT board becomes faulty |
When change to OFF: | When this station's line monitoring has found the station OK |
When related to: | N/A |
Additional information
There is also a default "Faulty Line" event, which becomes active if one more stations are faulty. This event is used for general line error reporting. See
- Application:
- - Switch over a PA-system to a standby cir circuit