Difference between revisions of "Firewall (IP Stations)"
From Zenitel Wiki
Line 2: | Line 2: | ||
All IP Stations have an embeded firewall. | All IP Stations have an embeded firewall. | ||
+ | * Select '''Advanced Network''' > '''Firewall''': | ||
[[File:SIP firewall.JPG|thumb|left|500px|Firewall Settings]] | [[File:SIP firewall.JPG|thumb|left|500px|Firewall Settings]] |
Revision as of 14:42, 23 June 2017
All IP Stations have an embeded firewall.
- Select Advanced Network > Firewall:
- SSH [Turbine only]: Enable or disable SSH on station, disabled by default.
- HTTP: Enable or disable HTTP on station, enabled by default.
- HTTPS: Enable or disable HTTPS on station, enabled by default.
- SIP (tcp) [Turbine only]: Enable or disable SIP over tcp on station, enabled by default.
- SIPS [Turbine only]: Enable or disable SIPS on station, enabled by default.
- Demo: Enable or disable DIP on station, disabled by default.
- DIP: Enable or disable DIP on station, enabled by default.
- TFTP Server: Enable or disable TFTP Server on station, enabled by default.
- SNMP: Enable or disable SNMP on station, enabled by default.
- SIP (udp): Enable or disable SIP over udp on station, enabled by default.
- Pulse: Enable or disable Pulse on station, enabled by default.
- mDNS: Enable or disable mDNS on station, enabled by default.
- DIP Multicast: Enable or disable DIP Multicast on station, enabled by default.
- Discovery: Enable or disable Discovery on station, enabled by default.
- Zap [Turbine only]: Enable or disable ZAP on station, enabled by default.
- ZapWeb [Turbine only]: Enable or disable ZapWeb on station, enabled by default.
- VoIP: Enable or disable VoIP on station, enabled by default.
- NOTE: VoIP port range is configurable only if station is in SIP mode.