Difference between revisions of "Grandstream HandyTone-488"
From Zenitel Wiki
| Line 27: | Line 27: | ||
*FXS Port settings | *FXS Port settings | ||
:-Set preferred codec to be “PCMU” (G711μlaw) on all choices: | :-Set preferred codec to be “PCMU” (G711μlaw) on all choices: | ||
| + | |||
| + | === Configuration of AlphaCom E === | ||
| + | The AlphaCom E needs to be configured with a [[SIP registrar node - configuration|SIP registrar node]]. | ||
| + | |||
[[Category:SIP]] | [[Category:SIP]] | ||
Revision as of 22:48, 4 December 2007
- HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port
- If HandyTone-488 loose power, registration or network, you get pass-through from telephone to PSTN (FXO port)
- The LAN port has default IP address 192.168.2.1
- Connect a PC directly to this port – the DHCP server will assign IP address to the PC
- Login with password admin
- Enable ”WAN side http access” in Advanced Settings
<br\><br\><br\><br\><br\>
- Do an update and reboot!
- The WAN port is then connected to the AlphaCom Ethernet port directly or on the same LAN as the AlphaCom
- Administration of the HandyTone can then be done from the WAN side also
- Set WAN IP address in Basic Settings
- FXS Port settings
- - SIP Server: Equal to the AlphaCom IP address
- - Outbound Proxy: Equal to the AlphaCom IP address
- - User ID: Equal to the Directory Number in AlphaPro
- - Enable ”User ID is phone number” and “SIP registration”
- FXS Port settings
- -Set preferred codec to be “PCMU” (G711μlaw) on all choices:
Configuration of AlphaCom E
The AlphaCom E needs to be configured with a SIP registrar node.