Difference between revisions of "Group Call - Increased volume"
From Zenitel Wiki
Line 9: | Line 9: | ||
{| | {| | ||
|- | |- | ||
− | |width=" | + | |width="150pt"|'''Event Owner''': |
|width="400pt"|Station Id: Id: 1 (101 The Door) | |width="400pt"|Station Id: Id: 1 (101 The Door) | ||
|- | |- | ||
Line 18: | Line 18: | ||
|'''When change to''': || ON or OFF | |'''When change to''': || ON or OFF | ||
|- | |- | ||
− | |'''When related to''': || Directory Number | + | |'''When related to''': || Directory Number, Id: 86 |
|- | |- | ||
|'''Action:''' || | |'''Action:''' || |
Revision as of 16:14, 2 June 2015
This article describes how to increase the volume of a group call announcement. The volume is set back to default value when the group call is ended.
Minimum software is AMC version 11.
In the following example a door station (101) is making a group call with repeatative gong to group 4. The members in group 4 also needs to be members of UDP group 7. In AlphaPro, go to Exchange and System -> Events, press Insert and create the following events:
Event Owner: | Station Id: Id: 1 (101 The Door) |
Event type: | 08 - Conversation Outgoing |
Sub event: | 0 |
When change to: | ON or OFF |
When related to: | Directory Number, Id: 86 |
Action: |
IF %chg(1,0) tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U6 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP stop ENDIF tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U3 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP