Difference between revisions of "Group call feature"
From Zenitel Wiki
(New page: '''39 FEAT_GROUP_CALL''' {| border="1" !style="background:#ffdead;"|Param1 !style="background:#ffdead;"|Description |- | ?? || Group Call |- |colspan="2"|Voice paging to a group of station...) |
|||
(14 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
− | + | {{AI}} | |
− | {| | + | {| |
− | |||
− | |||
|- | |- | ||
− | | | + | | width="170pt" |'''Feature''': |
+ | | Group call | ||
|- | |- | ||
− | | | + | |'''Default directory number''': || 84-88, 890-899 |
− | + | |- | |
− | + | |'''Feature number''': || 39 | |
+ | |- valign="top" | ||
+ | |'''Parameter 1''': || 1-250 = Group index number | ||
+ | |- | ||
+ | |'''Parameter 2''': | ||
+ | |PA Control Bitmap: [[ PA activation, one-step#PA control bitmap | Control Bitmap]] | ||
|- | |- | ||
+ | |'''Parameter 3''': | ||
+ | |0 = Dynamic multicast port/address (default). 1-255 = static port/address. (From 13.1.3.0) | ||
+ | Example Param3 = 50 with default IP settings and Node number 1: | ||
+ | * Multicast IP address: 239.192.1.50 | ||
+ | * IP port: 61102 (Group call default port 61002 + (2 * 50)) | ||
+ | |- valign="top" | ||
+ | |'''Description''': || [[Groups#Group_Call|Group call]] (voice paging) to a group of stations. Dial group number and press M-key to talk. | ||
|} | |} | ||
+ | {{Note|In a system with IP Stations, maximum '''50''' stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, group calls must use multicast. (AlphaPro: Exchange & System -> System -> VoIP tab -> Enable "Multicast"). See also: [[Multicast_in_AlphaCom]]}} | ||
[[AlphaCom Feature List|Back to feature list]] | [[AlphaCom Feature List|Back to feature list]] |
Latest revision as of 12:49, 7 March 2022
Feature: | Group call |
Default directory number: | 84-88, 890-899 |
Feature number: | 39 |
Parameter 1: | 1-250 = Group index number |
Parameter 2: | PA Control Bitmap: Control Bitmap |
Parameter 3: | 0 = Dynamic multicast port/address (default). 1-255 = static port/address. (From 13.1.3.0)
Example Param3 = 50 with default IP settings and Node number 1:
|
Description: | Group call (voice paging) to a group of stations. Dial group number and press M-key to talk. |
In a system with IP Stations, maximum 50 stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, group calls must use multicast. (AlphaPro: Exchange & System -> System -> VoIP tab -> Enable "Multicast"). See also: Multicast_in_AlphaCom |