Actions

Difference between revisions of "INCA IP DualDisplay Station - Restore Factory Defaults"

From Zenitel Wiki

(→‎By a power boot sequence)
 
(10 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
* By a power boot sequence
 
* By a power boot sequence
  
−
==From the display menu==
+
<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
  
 +
 +
==Load factory defaults via the display menu==
 
The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.
 
The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.
 +
 
* Press the '''Setup''' button beneath the display  
 
* Press the '''Setup''' button beneath the display  
 
* Enter the password '''1851''' and press the '''Ok''' button.
 
* Enter the password '''1851''' and press the '''Ok''' button.
Line 14: Line 17:
 
|[[Image:Load Defaults in IP Display Station - 2.PNG|thumb|260px]]
 
|[[Image:Load Defaults in IP Display Station - 2.PNG|thumb|260px]]
 
|}
 
|}
 +
* The station will now restart with factory settings
  
−
The station will now restart with factory settings.
+
== Factory default values ==
−
 
 
−
== By a power boot sequence ==
 
−
The Factory Default procedure can be used to either set the station to use a Static IP address, or to use IP address from a DHCP server.
 
−
 
 
−
=== Restore with Static IP ===
 
−
[[File:DualDisplay Privacy.png|thumb|300px|right|Location of the Privacy button]]
 
−
# Press and hold the Privacy button. Power up the station
 
−
# When the station LED starts blinking, release the privacy button '''after exactly 2 blinks'''.
 
−
# Let the LED blink for '''exactly 2 more times''', then press the button again.
 
−
# Keep the button pressed until the LED '''blinks fast 2 times''' indicating a successful reset with static IP.
 
−
# Release the button and the station will restart with the factory default settings.
 
−
 
 
−
Factory default values:
 
 
*Station Mode: '''Pulse'''
 
*Station Mode: '''Pulse'''
 
*Station IP address: '''169.254.1.100'''
 
*Station IP address: '''169.254.1.100'''
Line 34: Line 25:
 
*Password: '''alphaadmin'''
 
*Password: '''alphaadmin'''
  
−
=== Restore with DHCP enabled ===
+
== Load factory defaults via power boot sequence ==
−
# Press and hold the Privacy button. Power up the station
+
[[File:DualDisplay Privacy.png|thumb|300px|right|Location of the Privacy button]]
−
# When the station LED starts blinking, release the privacy button '''after exactly 2 blinks'''.
+
The unit can be set to use either '''Static IP''' or '''DHCP'''. Pay attention to the station LED during the restore procedure:
−
# Let the LED blink for '''exactly 4 more times''', then press the button again.
+
 
−
# Keep the button pressed until the LED '''blinks fast 4 times''' indicating a successful reset with DHCP.
+
# While pressing the '''Privacy''' button, power up the station kit and keep the button pressed.
 +
# Release the button '''after exactly 2 flashes''' of the LED.
 +
# Let the LED flash for '''exactly 2 more times''' (Static IP) or '''exactly 4 more times''' (DHCP), then press the button again.
 +
# Keep the button pressed until the LED '''flashes fast 2 times''' (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset.
 
# Release the button and the station will restart with the factory default settings.
 
# Release the button and the station will restart with the factory default settings.
 +
  
 
Factory default values:
 
Factory default values:
 
*Station Mode: '''Pulse'''
 
*Station Mode: '''Pulse'''
−
*Station IP address: '''From DHCP server'''
+
*Station IP address: '''169.254.1.100''' or '''DHCP'''
 
*Username: '''admin'''
 
*Username: '''admin'''
 
*Password: '''alphaadmin'''
 
*Password: '''alphaadmin'''
−
 
  
  
  
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 14:23, 15 May 2018

APS.png

The IP DualDisplay station can be reset to Factory Default settings in two ways:

  • From the display menu
  • By a power boot sequence


Load factory defaults via the display menu

The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.

  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG
  • The station will now restart with factory settings

Factory default values

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin

Load factory defaults via power boot sequence

Location of the Privacy button

The unit can be set to use either Static IP or DHCP. Pay attention to the station LED during the restore procedure:

  1. While pressing the Privacy button, power up the station kit and keep the button pressed.
  2. Release the button after exactly 2 flashes of the LED.
  3. Let the LED flash for exactly 2 more times (Static IP) or exactly 4 more times (DHCP), then press the button again.
  4. Keep the button pressed until the LED flashes fast 2 times (Static IP) or flashes fast 4 times (DHCP) indicating a successful reset.
  5. Release the button and the station will restart with the factory default settings.


Factory default values:

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100 or DHCP
  • Username: admin
  • Password: alphaadmin
Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_IP_DualDisplay_Station_-_Restore_Factory_Defaults&oldid=185995"