Difference between revisions of "INCA Station Restore Factory Defaults"

Latest revision as of 14:16, 15 May 2018

Applicable for stations

IP Substations - 1008041100/1008051000
IP Video Door Stations - 1401110100/1401110200

Procedure

When loading factory defalt settings, the unit can be set to use either Static IP or DHCP.

While pressing the call button, power up the station and keep the button pressed.
Release the button after exactly 2 flashes of the LED.
Let the LED flash for exactly 2 more times (Static IP) or exactly 4 more times (DHCP), then press the button again.
Keep the button pressed until the LED flashes fast 2 times (Static IP) or flashes fast 4 times (DHCP) indicating a successful reset.
Release the button and the station will restart with the factory default settings.

Factory default values

Station Mode: Pulse
Station IP address: 169.254.1.100 (Static) or DHCP
Username: admin
Password: alphaadmin

Software 01.06 and earlier: Username/password is ADMIN/alphacom

@@ Line 1: / Line 1: @@
-An IP Station may have to be reset to its original factory default settings if, for instance, the password to the webserver is forgotten.
+{{APS}}
+== Applicable for stations ==
+* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
+* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]]
+<div style="text-align:left;"> <youtube width="300" height="180">W_YbTuXvr1w</youtube>  </div>
+<br>
+<div style="text-align:left;"> <youtube width="300" height="180">bJhq8uyTP24</youtube>  </div>
-The defaults can be either be set to Static IP or Activated DHCP (when there are many new IP Substations in an installation).
+==Procedure ==
+When loading factory defalt settings, the unit can be set to use either '''Static IP''' or '''DHCP'''.
+[[File:Load Defaults without Display - 1.PNG|thumb|right|200px]]
+[[File:Load Defaults without Display - 2.PNG|right|thumb|200px]]
+# While pressing the call button, power up the station and keep the button pressed.
+# Release the button '''after exactly 2 flashes''' of the LED.
+# Let the LED flash for '''exactly 2 more times''' (Static IP) or '''exactly 4 more times''' (DHCP), then press the button again.
+# Keep the button pressed until the LED '''flashes fast 2 time'''s (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset.
+# Release the button and the station will restart with the factory default settings.
+<br>
+== Factory default values ==
+*Station Mode: '''Pulse'''
+*Station IP address: '''169.254.1.100''' (Static) or '''DHCP'''
+*Username: '''admin'''
+*Password: '''alphaadmin'''
-== Restore to Factory Default for IP Stations without Display ==
-This procedure is the recommended procedure for all IP Stations without Display:
-* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
-* IP Substation Kit - [[IP Substation Kit - 1008090200|1008090200]]
-* [[IP Master Station Kit - 1008093000]] if ''no'' Display is connected.
-* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]]
-<br/>
-The procedure ''can'' also be applied to:
-* The [[IP Substation Kit - 1008090200]] if a button is connected to Input 1.
-* The IP Dual Display - [[IP Dual Display Station - 1008007000|1008007000]] by using the Privacy button. (In the procedure below, use the Privacy button when the procedure says "Call button").
-<br/>
-The Factory Default procedure can be used to either set the station to use a Static IP address, or to use IP address from a DHCP server.
-=== Restore with Static IP ===
-[[File:Load Defaults without Display - 1.PNG|right|300px]]
-# While pressing the call button, power up the substation.
-# When the substation LED starts blinking, release the call button '''after exactly 2 blinks'''.
-# Let the LED blink for '''exactly 2 more times''', then press the button again.
-# Keep the button pressed until the LED '''blinks fast 2 times''' indicating a successful reset with static IP.
-# Release the button and the substation will restart with the factory default settings.
-<u>'''Factory default values:'''</u>
-* Station IP address: '''169.254.1.100'''
-* AlphaCom IP address: '''169.254.1.5'''
-* Username: '''admin''' (Software 01.06 and earlier: '''ADMIN''')
-* Password: '''alphaadmin''' (Software 01.06 and earlier: '''alphacom''')
-=== Restore with Activated DHCP ===
+{{note| Software 01.06 and earlier: Username/password is '''ADMIN/alphacom''' }}
-[[File:Load Defaults without Display - 2.PNG|right|300px]]
-The DHCP option is available from software version 01.07.<br/>
-* While pressing the call button, power up the substation.
-* When the substation LED starts blinking, release the call button '''after exactly 2 blinks'''.
-* Let the LED blink for '''exactly 4 more times''', then press the button again.
-* Keep the button pressed until the LED '''blinks fast 4 times''' indicating a successful reset with activated DHCP.
-* Release the button and the substation will restart with the factory default settings.
-<br/>
-'''Factory default values:'''
-* Station IP address: (determined by DHCP server)
-* AlphaCom IP address: '''169.254.1.5'''
-* Username: '''admin''' (Software 01.06 and earlier: '''ADMIN''')
-* Password: '''alphaadmin''' (Software 01.06 and earlier: '''alphacom''')
-<br/>
 [[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Difference between revisions of "INCA Station Restore Factory Defaults"

From Zenitel Wiki

Latest revision as of 14:16, 15 May 2018

Applicable for stations

Procedure

Factory default values