Difference between revisions of "INCA Video Desk Station LED Indicators"
From Zenitel Wiki
(Created page with "In the LCD display there is a bar color indicating the connection status: * '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected...") |
(→Station LED) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | =Station LED= | ||
| + | LED4 - Red 5mm LED on board rear side, also seen through front plate. | ||
| + | [[File:IPDeskLED.png|left|thumb|200px|Station LED]] | ||
| + | <br style="clear:both;" /> | ||
| + | '''Blinking at 1 second intervals:'''<br/> | ||
| + | Station cannot register to the server/controller | ||
| + | |||
| + | Possible reasons: | ||
| + | * Invalid network settings (IP address and network mask) in the device | ||
| + | * Wrong or missing account settings (Server IP, directory number, password..) | ||
| + | * Failing to register due to missing license in the server | ||
| + | * The server is offline | ||
| + | * Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP) | ||
| + | If the server is on a different subnet, check that | ||
| + | * A valid Default gateway is defined | ||
| + | |||
| + | '''No blinking:''' | ||
| + | |||
| + | Possible reasons: | ||
| + | * Station connected and registered to the server/controller | ||
| + | * Station not powered up (if no other LEDs are active) | ||
| + | |||
| + | '''Blinking at 5 second intervals:'''<br/> | ||
| + | {{Note| This LED behaviour only applies in ICX-AlphaCom mode}} | ||
| + | Station connected but NOT registered in the ICX-AlphaCom | ||
| + | |||
| + | Possible reasons: | ||
| + | * Station has not been programmed in AlphaPro | ||
| + | * Missing IP Station license in ICX-AlphaCom | ||
| + | |||
| + | [[Category:Station Indication LEDs]] | ||
| + | |||
| + | =Display Color Bar= | ||
In the LCD display there is a bar color indicating the connection status: | In the LCD display there is a bar color indicating the connection status: | ||
* '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected to the server. | * '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected to the server. | ||
| Line 4: | Line 37: | ||
* '''<span style="color: Red">Red</span>''' indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up. | * '''<span style="color: Red">Red</span>''' indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up. | ||
* '''<span style="color: Orange">Yellow</span>-<span style="color: Red">Red</span>''' flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time) | * '''<span style="color: Orange">Yellow</span>-<span style="color: Red">Red</span>''' flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time) | ||
| + | |||
| + | [[Category:Station Indication LEDs]] | ||
Latest revision as of 12:44, 20 November 2020
Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Blinking at 1 second intervals:
Station cannot register to the server/controller
Possible reasons:
- Invalid network settings (IP address and network mask) in the device
- Wrong or missing account settings (Server IP, directory number, password..)
- Failing to register due to missing license in the server
- The server is offline
- Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
If the server is on a different subnet, check that
- A valid Default gateway is defined
No blinking:
Possible reasons:
- Station connected and registered to the server/controller
- Station not powered up (if no other LEDs are active)
Blinking at 5 second intervals:
|
This LED behaviour only applies in ICX-AlphaCom mode |
Station connected but NOT registered in the ICX-AlphaCom
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in ICX-AlphaCom
Display Color Bar
In the LCD display there is a bar color indicating the connection status:
- Yellow indicates that the IP Desktop Station is connected to the server.
- Green indicates an active, incoming or outgoing call.
- Red indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up.
- Yellow-Red flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time)