Difference between revisions of "INCA Video Doorstation Board Connectors"
From Zenitel Wiki
(→Hardware version 0.1) |
(→Hardware version 0.2/0.3/1.0) |
||
| Line 45: | Line 45: | ||
===Hardware version 0.2/0.3/1.0=== | ===Hardware version 0.2/0.3/1.0=== | ||
| − | [[File:ConnectorsCP 2.PNG]] | + | [[File:ConnectorsCP 2.PNG|400px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | '''P1:'''<br> | |
| − | + | : LAN Port | |
| − | + | '''P3:'''<br> | |
| − | + | : 1&2: Loudspeaker 4ohm/2W (already connected) | |
| − | + | : 3&4: NO Relay - Potential free relay contact, max 1A/24V | |
| − | + | : 5: 0V* | |
| − | + | : 6: 24V* | |
*External power supply, 21-27VDC/0.5A. Attention! '''Not''' simultaneously with PoE! | *External power supply, 21-27VDC/0.5A. Attention! '''Not''' simultaneously with PoE! | ||
| − | + | '''X2:'''<br> | |
Call Button (Board version 0.2): | Call Button (Board version 0.2): | ||
| − | + | # RT (for red LED (red cable)) | |
| − | + | # GR (for green LED (green cable)) | |
| − | + | # SW (closer (button)) | |
| − | + | # SW (closer (button)) | |
| − | + | '''X3:'''<br> | |
Button Module 2T (Board version 0.2): | Button Module 2T (Board version 0.2): | ||
| − | + | # GND (ground for illumination) | |
| − | + | # I_LED (background illumination (+5V)) | |
| − | + | # NC | |
| − | + | # Z1 (first button) DAK2 | |
| − | + | # Z2 (second button) DAK3 | |
| − | + | # GND (reference point buttons) | |
| − | + | '''X4:'''<br> | |
Button Module 4T (Board version 0.2): | Button Module 4T (Board version 0.2): | ||
| − | + | # NC | |
| − | + | # GND (NC) | |
| − | + | # I_LED (background illumination) | |
| − | + | # LED_ON (grounding for illumination) | |
| − | + | # Z1 (1st button) DAK4 | |
| − | + | # Z2 (2nd button) DAK5 | |
| − | + | # Z3 (3rd button) DAK6 | |
| − | + | # Z4 (4th button) DAK7 | |
| − | + | # "GND" (reference point buttons) | |
Revision as of 13:19, 25 October 2016
Hardware version 0.1
P1:
- LAN Port
P3:
- 1&2: Loudspeaker 4ohm/2W (already connected)
- 3&4: NO Relay - Potential free relay contact, max 1A/24V
- 5: 0V*
- 6: 24V*
*External power supply, 21-27VDC/0.5A. Attention! Not simultaneously with PoE!
X2:
Button Module 2B:
- GND (ground for illumination)
- I_LED (background illumination (+5V))
- NC
- Z1 (first button) DAK2
- Z2 (second button) DAK3
- GND (reference point buttons)
Call Button (Board version 0.1):
- 7: RT (for red LED (red cable))
- 8: GR (for green LED (green cable))
- 9: SW (closer (button))
- 10: SW (closer (button))
X3:
Button Module 4T:
- NC
- GND (NC)
- I_LED (background illumination)
- LED_ON (grounding for illumination)
- Z1 (1st button) DAK4
- Z2 (2nd button) DAK5
- Z3 (3rd button) DAK6
- Z4 (4th button) DAK7
- "GND" (reference point buttons)
Hardware version 0.2/0.3/1.0
P1:
- LAN Port
P3:
- 1&2: Loudspeaker 4ohm/2W (already connected)
- 3&4: NO Relay - Potential free relay contact, max 1A/24V
- 5: 0V*
- 6: 24V*
*External power supply, 21-27VDC/0.5A. Attention! Not simultaneously with PoE!
X2:
Call Button (Board version 0.2):
- RT (for red LED (red cable))
- GR (for green LED (green cable))
- SW (closer (button))
- SW (closer (button))
X3:
Button Module 2T (Board version 0.2):
- GND (ground for illumination)
- I_LED (background illumination (+5V))
- NC
- Z1 (first button) DAK2
- Z2 (second button) DAK3
- GND (reference point buttons)
X4:
Button Module 4T (Board version 0.2):
- NC
- GND (NC)
- I_LED (background illumination)
- LED_ON (grounding for illumination)
- Z1 (1st button) DAK4
- Z2 (2nd button) DAK5
- Z3 (3rd button) DAK6
- Z4 (4th button) DAK7
- "GND" (reference point buttons)