Difference between revisions of "IP-LCM Connections"
From Zenitel Wiki
(→Outputs) |
|||
| Line 8: | Line 8: | ||
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header. <br> | From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header. <br> | ||
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output. | The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output. | ||
| + | |||
| + | |||
| + | Relay ratings: | ||
| + | * '''Outputs''': DPDT (NO, NC, COM) | ||
| + | * '''Switched voltage''': < 250VAC Rated (400VAC Max) | ||
| + | * '''Switched Voltage''': < 2000 VA max | ||
| + | * '''Switching Current''': < 8A rated (15A max, 4s) | ||
== Indicators == | == Indicators == | ||
Each output has a LED which indicates if the output is active or not. | Each output has a LED which indicates if the output is active or not. | ||
Revision as of 10:21, 10 January 2019
For information on the TKIS-2 kit connections, see this link
Inputs
From the top left the inputs are numbered as pin 17 to pin 24. Each input has a corresponding input switch which toggles between closing contact and active input.
Outputs
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header.
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output.
Relay ratings:
- Outputs: DPDT (NO, NC, COM)
- Switched voltage: < 250VAC Rated (400VAC Max)
- Switched Voltage: < 2000 VA max
- Switching Current: < 8A rated (15A max, 4s)
Indicators
Each output has a LED which indicates if the output is active or not.