Difference between revisions of "IP-LCM Connections"
From Zenitel Wiki
| Line 8: | Line 8: | ||
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header. <br> | From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header. <br> | ||
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output. | The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output. | ||
| + | |||
| + | == Indicators == | ||
| + | Each output has a LED which indicates if the output is active or not. | ||
Revision as of 15:44, 10 December 2018
See information on the TKIS-2 kit connection see this link
Inputs
From the top left the inputs are numbered as pin 17 to pin 24. Each input has a corresponding input switch which toggles between closing contact and active input.
Outputs
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header.
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output.
Indicators
Each output has a LED which indicates if the output is active or not.