Actions

Difference between revisions of "IP Desktop Station LED Indications"

From Zenitel Wiki

Line 3: Line 3:
 
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]]
 
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
<u>'''Blinking at 1 second intervals:'''</u>
+
'''Blinking at 1 second intervals:'''<br/>
 
+
Station has no connection to the AlphaCom XE Audio Server.
*Station has no connection to the AlphaCom XE Audio Server.
 
  
 
Possible reasons:
 
Possible reasons:
:*No connection to Ethernet  
+
* No connection to Ethernet  
:*Wrong AlphaCom IP address configured  
+
* Wrong AlphaCom IP address configured  
:*Invalid IP address  
+
* Invalid IP address  
:*No gateway or wrong gateway to the AlphaCom XE Audio Server
+
* No gateway or wrong gateway to the AlphaCom XE Audio Server
  
<u>'''Blinking at 5 second intervals:'''</u> <br/>
+
'''Blinking at 5 second intervals:'''<br/>
*Station connected but NOT registered in the AlphaCom XE Audio Server.  
+
Station connected but NOT registered in the AlphaCom XE Audio Server.  
  
Reason:  
+
Possible reasons:  
:*Station has not been programmed in AlphaPro
+
* Station has not been programmed in AlphaPro
:*Missing IP Station license in AlphaCom XE Audio Server
+
* Missing IP Station license in AlphaCom XE Audio Server
  
<u>'''No blinking:'''</u>
+
'''No blinking:'''
  
 
Possible reasons:  
 
Possible reasons:  
:*Station connected and registered to the AlphaCom XE Audio Server
+
* Station connected and registered to the AlphaCom XE Audio Server
:*Station not powered up (if no other LEDs are active)
+
* Station not powered up (if no other LEDs are active)
  
 
[[Category:INCA Indication LEDs]]
 
[[Category:INCA Indication LEDs]]

Revision as of 12:28, 25 October 2016

Station LED

LED4 - Red 5mm LED on board rear side, also seen through front plate.

Station LED


Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.

Possible reasons:

  • No connection to Ethernet
  • Wrong AlphaCom IP address configured
  • Invalid IP address
  • No gateway or wrong gateway to the AlphaCom XE Audio Server

Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.

Possible reasons:

  • Station has not been programmed in AlphaPro
  • Missing IP Station license in AlphaCom XE Audio Server

No blinking:

Possible reasons:

  • Station connected and registered to the AlphaCom XE Audio Server
  • Station not powered up (if no other LEDs are active)