Difference between revisions of "IP Hotline Connections"

Latest revision as of 13:26, 23 June 2023

The IP Hotline handset is using the Mic and Speaker connectors for audio.

I/O #1 is used as an input to detect the hook switch

@@ Line 1: / Line 1: @@
-== Introduction ==
+The IP Hotline handset is using the Mic and Speaker connectors for audio.
-The table below is an overview of the main connectors involved when installing the IP Hotline Station.
-{| border="1"
+I/O #1 is used as an input to detect the hook switch
-|-
-| align=left | LAN (P1) || 10/100 Mbps RJ45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
-|-
-| align=left | AUX (P2) || 10/100 Mbps RJ45 port for auxilliary equipment such as PC or IP Camera.
-|-
-| align=left | Input/Output || Pluggable screw terminal
-|-
-| align=left | Local Power || Pluggable screw terminal, 17-27 VDC Idle 4W, max. 8W
-|-
-|}
-To access these connectors the front cover must be removed.
+For more details see [[Turbine Compact series board connectors]]
-== Power Supply ==
+[[File:1008070010 Hotline IP-TKIS.png|500px]]
-The IP Hotline Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
-If PoE is not available, the IP Hotline Station  can be connected to a 24 VDC local power supply.
+[[Category: Turbine Connections]]
-See Related Article [[INCA Master Station Kit Board Connectors]] for local power supply connections.
-[[Category: INCA Connections]]