Difference between revisions of "IP Substation - Amplified calling"

Revision as of 18:28, 28 November 2008

This article describes how to connect an external amplifier to the line output of the IP substation.

Amplified calling - amplifier constantly on

The power amplifier is controlled through input 1 and 2. By strapping one can make the amplifier constanly on:

Note: When the amplifier is constanly on some humming might be heard in the speaker in idle.

Amplified calling - amplifier controlled by M-key

The amplifier can be switched on and off by the relay on the IP substation. The relay is controlled by the RCO in the Event Handler.

Configure the relay operation:

In Exchange & System -> RCO, map a free RCO to the relay of the station.
In Users & Stations select the IP station in the list box, and press the button 'Events'. 'Insert' a new events with the following attributes:

Event Owner:	The IP station
Event type:	1 - Audio
Subevent:	126 (Press 'Details' to see which audio events)
When change to:	ON or OFF
When related to:	(not used)
Action:	RCO 10

@@ Line 22: / Line 22: @@
 |width="300pt"|The IP station
 |-
-|'''Event type''': || 1 - Audio
+|'''Event type''': || [[Audio (Event Type)|1 - Audio]]
 |-
 |'''Subevent''': || 126 (Press 'Details' to see which audio events)