Difference between revisions of "IP Substation Indication LEDs"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | + | [[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | |
| − | + | == Station LED (on board and in front plate) == | |
Blinking 1 sec. interval Station does not have connection to the AlphaCom E exchange. | Blinking 1 sec. interval Station does not have connection to the AlphaCom E exchange. | ||
Possible reasons: | Possible reasons: | ||
| Line 15: | Line 15: | ||
- Station connected and registered to the AlphaCom E exchange - All OK | - Station connected and registered to the AlphaCom E exchange - All OK | ||
- Station not powered up (if no other LEDs are active) | - Station not powered up (if no other LEDs are active) | ||
| − | + | ||
| + | == Status LED == | ||
Blinking 2 red + 1 green Station does not have connection to the AlphaCom E exchange | Blinking 2 red + 1 green Station does not have connection to the AlphaCom E exchange | ||
Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been | Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been | ||
Revision as of 22:30, 10 October 2007
Station LED (on board and in front plate)
Blinking 1 sec. interval Station does not have connection to the AlphaCom E exchange. Possible reasons: - No connection to Ethernet - Wrong AlphaCom E IP address configured - Invalid IP address - No or wrong gateway to the AlphaCom E exchange Blinking 5 sec. interval Station has connection to the AlphaCom E exchange, but has not been registered. Reason: - Station has not been programmed in AlphaPro No blinking Possible reasons: - Station connected and registered to the AlphaCom E exchange - All OK - Station not powered up (if no other LEDs are active)
Status LED
Blinking 2 red + 1 green Station does not have connection to the AlphaCom E exchange Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been registered Blinking 3 green Station connected and registered in the AlphaCom E exchange LAN LEDs (on LAN and AUX RJ45-jacks): Left green LED: - Steady light Ethernet connection OK - Blinking Ethernet traffic - No light No Ethernet connection Right amber LED: - Light 100 Mbit Ethernet connection - No light 10 Mbit Ethernet connection