Difference between revisions of "IP Substation Indication LEDs"
From Zenitel Wiki
| Line 1: | Line 1: | ||
[[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | [[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | ||
== Station LED (on board and in front plate) == | == Station LED (on board and in front plate) == | ||
| − | '''Blinking 1 | + | '''Blinking at 1 second interval''': Station does not have connection to the AlphaCom E exchange. |
:''Possible reasons'': | :''Possible reasons'': | ||
:* No connection to Ethernet | :* No connection to Ethernet | ||
| Line 8: | Line 8: | ||
:* No or wrong gateway to the AlphaCom E exchange | :* No or wrong gateway to the AlphaCom E exchange | ||
| − | '''Blinking 5 | + | '''Blinking at 5 seconds interval''': Station has connection to the AlphaCom E exchange, but has not been registered. |
:''Reason'': | :''Reason'': | ||
:* Station has not been programmed in AlphaPro | :* Station has not been programmed in AlphaPro | ||
Revision as of 22:35, 10 October 2007
Station LED (on board and in front plate)
Blinking at 1 second interval: Station does not have connection to the AlphaCom E exchange.
- Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom E IP address configured
- Invalid IP address
- No or wrong gateway to the AlphaCom E exchange
Blinking at 5 seconds interval: Station has connection to the AlphaCom E exchange, but has not been registered.
- Reason:
- Station has not been programmed in AlphaPro
No blinking
- Possible reasons:
- Station connected and registered to the AlphaCom E exchange - All OK
- Station not powered up (if no other LEDs are active)
Status LED
Blinking 2 red + 1 green Station does not have connection to the AlphaCom E exchange Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been registered Blinking 3 green Station connected and registered in the AlphaCom E exchange LAN LEDs (on LAN and AUX RJ45-jacks): Left green LED: - Steady light Ethernet connection OK - Blinking Ethernet traffic - No light No Ethernet connection Right amber LED: - Light 100 Mbit Ethernet connection - No light 10 Mbit Ethernet connection