Licenses

To use AlphaCom features such as AlphaNet VoIP and SIP, the system requires a software license key. This license key is valid for one MAC address. The following feature require license:

• VoIP AlphaNet/MultiModule
• SIP Trunk
• SIP phones
• IP stations
• RingMaster (RM) interconnection

AlphaNet and MultiModule

AlphaNet

AlphaNet over IP

The license for STENTOFON AlphaNet makes it possible to establish communication between AlphaCom E nodes in an IP network.

Available licenses:

AlphaNet and Multi-Module VoIP License for 2 Static Lines (100 9640 002)

AlphaNet and Multi-Module VoIP License for 8 Dynamic Lines (100 9640 008)

AlphaNet and Multi-Module VoIP License for 16 Dynamic Lines (100 9640 016)

AlphaNet and Multi-Module VoIP License for 30 Dynamic Lines (100 9640 030)

AlphaNet and Multi-Module Upgrade from 2 to 8 Dynamic Lines (100 9640 108)

MultiModule

MultiModule over IP

The STENTOFON AlphaCom E MultiModule function makes it possible to increase the capacity of an exchange by adding up to four AlphaCom E exchange cabinets together in a multi-module. The multi-module exchange acts as one node with full integration of all features.

In the multi-module exchange one of the modules will act as master module and the others will be slave modules. The multi-module exchange supports redundancy mode. In case of master-slave communication error, the slave module will fallback to work as an individual exchange serving calls between stations connected directly to the exchange module.

The system is very easy to configure - simply enter the IP address of the slave modules and connect the modules together via a single Ethernet cable.

Licenses are required for each AlphaCom E module, the license key is common for AlphaNet and Multi Module functions. One license is valid for one MAC address and 2, 8, 16 or 30 dynamic lines.

Insert license key

Input license key

• Obtain the license key from your AlphaCom distributor.
• Log on to AlphaWeb
• Select System Configuration > License Key
• Enter the 24 character key string under New License Key
• Press the Insert new license key button to install this license

The license configuration is shown on top of the page.

AlphaCom E License Activation Code and Licence Keys

General

1. Zenitel generates a ‘License Activation Code’ (LAC) which can be regarded as the actual article
2. In order for Zenitel to be able to generate a License Key, the License Activation Code must be registered at Zenitel together with the MAC-address of the AMC-IP card for which the license is intended
3. Registration can be done by reporting the MAC-address and LAC in an e-mail to licensing@zenitel.com. More than one LAC can be listed on the registration form.
4. All listed License Activation Codes together with the MACaddress will be used to generate a single License Key which will enable all licensed functions.
5. The License Key will be shipped to the customer’s e-mail address.
6. As the License key is rather complex, it should be inserted in the set-up program using the copy/paste function.

Service

In case of service replacement of an AMC-IP card, all licenses will remain available for a 20-day period. A new lasting license key must be obtained for the new AMC-IP card during this period.

Additional licences

Additional licenses can be purchased at any time. Any new license will be added to already purchased licenses for the same hardware. A new license key will be issued to replace the existing license key; this will cover all the new and old legal licenses.