Difference between revisions of "MAC address (ICX and AlphaCom servers)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | Each ethernet | + | Each ethernet port on the [[AMC-IP]] board has an unique [http://en.wikipedia.org/wiki/MAC_address MAC address]. Zenitel has a MAC address range from 00:60:35:00:00:00 to 00:60:35:FF:FF:FF. |
| − | + | The AMC-IP board has a mac-chip with a MAC address used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | |
It is always the MAC address of Eth0 which is refered to in [[AlphaWeb]], ’System Monitoring > Node information' and in 'System Configuration > License key'. | It is always the MAC address of Eth0 which is refered to in [[AlphaWeb]], ’System Monitoring > Node information' and in 'System Configuration > License key'. | ||
Revision as of 16:28, 7 January 2008
Each ethernet port on the AMC-IP board has an unique MAC address. Zenitel has a MAC address range from 00:60:35:00:00:00 to 00:60:35:FF:FF:FF. The AMC-IP board has a mac-chip with a MAC address used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00.
It is always the MAC address of Eth0 which is refered to in AlphaWeb, ’System Monitoring > Node information' and in 'System Configuration > License key'. The MAC address of Eth1 is found in 'System Configuration > Interfaces'.
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-adminstrator with the correct MAC address.