Difference between revisions of "Noise Reduction feature (Pulse)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{P}} | {{P}} | ||
| − | The '''Noise Reduction''' feature can be activated from two different places: | + | The '''Noise Reduction''' feature is used for intercoms that should be put in noisy environments. The noise reduction feature filters out the background noise and at the same time keeps the voice signal. |
| + | |||
| + | The feature can be activated from two different places: | ||
* In the [[Pulse Server]] select: '''Server Management''' > '''Server Configuration''' > '''Call and Audio Settings''': | * In the [[Pulse Server]] select: '''Server Management''' > '''Server Configuration''' > '''Call and Audio Settings''': | ||
Revision as of 16:03, 10 January 2017
The Noise Reduction feature is used for intercoms that should be put in noisy environments. The noise reduction feature filters out the background noise and at the same time keeps the voice signal.
The feature can be activated from two different places:
- In the Pulse Server select: Server Management > Server Configuration > Call and Audio Settings:
- In a Pulse Station select: SIP Configuration > Audio Settings
The default value is 0 (disabled)
A value of 3 or 4 will normally give a good noise reduction, and at the same time give intelligible speech.