Actions

Output station lamp test feature

From Zenitel Wiki

Revision as of 09:34, 8 October 2019 by Nikica (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AI.png
Feature: Output "Station lamptest" MPC data message
Default directory number: 7874
Feature number: 45
Parameter 1: 0 (N/A)
Description: Some Control Room stations based on the MPC Data Protocol can do a lamp test when receiving a certain data message from the exchange. This feature activates lamp test on own station.

Procedure: Dial 7874.

Data generated on the MPC Data Protocol:

  • 021B AAAA

When dialled on a CRMV station, the LEDs goes ON for a few seconds.

Back to feature list