Difference between revisions of "Password (ENA Amplifiers)"
From Zenitel Wiki
(→Device GUI PIN) |
|||
| Line 19: | Line 19: | ||
=== Device GUI PIN === | === Device GUI PIN === | ||
| − | By default the display menu of the amplifier can be accessed without any pin code. However, it is possible to enable that pin code is required. Two levels can be defined; Read | + | By default the display menu of the amplifier can be accessed without any pin code. However, it is possible to enable that pin code is required. Two levels can be defined; Read Access and Full Access. |
[[Category: Pulse - Configuration]] | [[Category: Pulse - Configuration]] | ||
[[Category: SIP intercom - Configuration]] | [[Category: SIP intercom - Configuration]] | ||
Revision as of 14:55, 16 April 2018
The password of an ENA Amplifier can be changed by:
- Log into the amplifier
- Select Station Administration > Change Password.
Web Password
The Web Password is the password you need to use in the web browser of your PC to get access to the web interface of an ENA amplifier.
- User: The default username admin can be changed here
- Old Password: Enter the old password for security. Default is alphaadmin
- New Password: Enter a new password
- Confirm New Password: The new password must be confirmed to avoid misprint
Password can only contain numbers and letters, no other symbols allowed.
A factory reset will reset to default password.
Device GUI PIN
By default the display menu of the amplifier can be accessed without any pin code. However, it is possible to enable that pin code is required. Two levels can be defined; Read Access and Full Access.