View source for Pelco Digital Sentry and CP-CAM

{{AI}}
[[File:IP Video Door Station.PNG|thumb|400px|IP Video Station, item 1401110100]]
==Introduction==
CP-CAM, the camera in the IP Video Door Station 1401110100, can also be used with Pelco's Digital Sentry.

==Digital Sentry==
Digital Sentry supports most camera manufacturer with some pre-programmed parameters. But DS also offers the selection possibility 'Other'.
* Click 'Add IP Camera' and select 'Other'
* Set the IP address of the camera in the 'IP Configuration' section
* Under 'Custom URL' program the complete URL, for instance: http://169.254.1.101/mjpg/video.mjpg
* If the camera has been set up to authentication, enter the correct Username and Password 
<br>
Programming frame rate and resolution in the Digital Sentry camera setup dialog has no influence, CP-CAM does not accept these settings as part of the connection URL. The frame rate and resolution as set on the CP-CAM web page will be used. 

==Integration of ICX or AlphaCom with Digital Sentry==
For integration between ICX or AlphaCom and Digital Sentry see the article [[Pelco Digital Sentry - ICX-AlphaCom integration]]

[[Category:CCTV]]
[[Category:Video]]