Difference between revisions of "Pelco Digital Sentry and CP-CAM"
From Zenitel Wiki
(Created page with "thumb|400px|IP Video Station, item 1401110100 ==Introduction== CP-CAM, the camera in the IP Video Door Station 1401110100, can also be used wit...") |
(No difference)
|
Revision as of 11:36, 19 June 2014
Introduction
CP-CAM, the camera in the IP Video Door Station 1401110100, can also be used with Pelco's Digital Sentry.
Digital Sentry
Digital Sentry supports most camera manufacturer with some pre-programmed parameters. But DS also offers the selection possibility 'Other'.
- Click 'Add IP Camera' and select 'Other'
- Program Frame Rate and Resolution as set in CP-CAM web page; Note that the frame rate is set as frames per minute
- Set the IP address of the camera in the 'IP Configuration' section
- Under 'Custom URL' program the complete URL, for instance: http://169.254.1.101/mjpg/video.mjpg
- If the camera has been set up to authentication, enter the correct Username and Password