Pelco Digital Sentry and CP-CAM
From Zenitel Wiki
Introduction
CP-CAM, the camera in the IP Video Door Station 1401110100, can also be used with Pelco's Digital Sentry.
Digital Sentry
Digital Sentry supports most camera manufacturer with some pre-programmed parameters. But DS also offers the selection possibility 'Other'.
- Click 'Add IP Camera' and select 'Other'
- Program Frame Rate and Resolution as set in CP-CAM web page; Note that the frame rate is set as frames per minute
- Set the IP address of the camera in the 'IP Configuration' section
- Under 'Custom URL' program the complete URL, for instance: http://169.254.1.101/mjpg/video.mjpg
- If the camera has been set up to authentication, enter the correct Username and Password
Integration of AlphaCom with Digital Sentry
For integration between AlphaCom and Digital Sentry see the article Link title