Difference between revisions of "Physical number"
From Zenitel Wiki
(New page: The number series 101 to 499 and 5000 to 5152 are default directory numbers for all AlphaCom exchanges. The directory numbers are connected to '''physical numbers''' in the range from ...) |
|||
| Line 1: | Line 1: | ||
| + | [[Image:Physical_numbers.jpg|thumb]] | ||
The number series 101 to 499 and 5000 to 5152 are default [[directory numbers]] for all AlphaCom exchanges. The directory numbers are connected to '''physical numbers''' in the range from 1 to 552, where the physical numbers are given by the subscriber point on a [[ASLT|board]] in a certain position in a defined [[module]]. Since the card positions 2 - 7 are not used in [[AlphaCom E20]] (and [[AlphaCom 80+|80+]]), the corresponding default subscriber numbers are missing. The directory numbers can be changed by using the [[AlphaPro]] programming tool. | The number series 101 to 499 and 5000 to 5152 are default [[directory numbers]] for all AlphaCom exchanges. The directory numbers are connected to '''physical numbers''' in the range from 1 to 552, where the physical numbers are given by the subscriber point on a [[ASLT|board]] in a certain position in a defined [[module]]. Since the card positions 2 - 7 are not used in [[AlphaCom E20]] (and [[AlphaCom 80+|80+]]), the corresponding default subscriber numbers are missing. The directory numbers can be changed by using the [[AlphaPro]] programming tool. | ||
Revision as of 00:03, 3 July 2007
The number series 101 to 499 and 5000 to 5152 are default directory numbers for all AlphaCom exchanges. The directory numbers are connected to physical numbers in the range from 1 to 552, where the physical numbers are given by the subscriber point on a board in a certain position in a defined module. Since the card positions 2 - 7 are not used in AlphaCom E20 (and 80+), the corresponding default subscriber numbers are missing. The directory numbers can be changed by using the AlphaPro programming tool.