Difference between revisions of "Private Ringing mode (Event Type)"
From Zenitel Wiki
(→Event description) |
|||
Line 1: | Line 1: | ||
− | |||
==Event description== | ==Event description== | ||
{| | {| | ||
Line 10: | Line 9: | ||
|'''Subevent''': || N/A | |'''Subevent''': || N/A | ||
|- | |- | ||
− | |'''When change to ON''': || Ringing starts | + | |'''When change to ON''': || Ringing starts (private ringing call or call transfer ringing) |
|- | |- | ||
|'''When change to OFF''': || Ringing stops, because of conversation, time-out or C-key | |'''When change to OFF''': || Ringing stops, because of conversation, time-out or C-key |
Revision as of 03:21, 4 November 2007
Event description
Event Owner: | A station or an UDP group |
Event type: | 09 - Private Ringing Mode |
Subevent: | N/A |
When change to ON: | Ringing starts (private ringing call or call transfer ringing) |
When change to OFF: | Ringing stops, because of conversation, time-out or C-key |
When related to: | The calling station |
Application
- CRM IV LED control
- Call logging
- CCTV interfacing
- PA zone control
Additional information
- - This event is always paired with "07 Conv. incoming"
- - The event stays ON also during "Door opening" action.
- - The event is also triggered by local and global group calls, and when prssing M-key in a simplex conference
- - To filter away group calls and conferences: Set "Related to" = UDP 8 instead of "All"
Event description
Event Owner: | The called station |
---|---|
Event type: | 09 - Private Ringing Mode |
Sub-Event: | N/A |
When Change to ON: | At the start of incoming private ringing (or call transfer ringing) |
When Change to OFF: | When the station enters conversation, or ringing stops due to time-out or C-key |
When Related to: | The calling station |
- Additional information:
- - See also event "01 Audio - Private Ringing"
- Application
- - Additional call indication
- - CCTV control