Private Ringing mode (Event Type)
From Zenitel Wiki
Event description
| Event Owner: | A station or an UDP group |
| Event type: | 09 - Private Ringing Mode |
| Subevent: | N/A |
| When change to ON: | Ringing starts (private ringing call or call transfer ringing) |
| When change to OFF: | Ringing stops, because of conversation, time-out or C-key |
| When related to: | The calling station |
Application
- CRM IV LED control
- Call logging
- CCTV interfacing
- PA zone control
Additional information
- - This event is always paired with "07 Conv. incoming"
- - The event stays ON also during "Door opening" action.
- - The event is also triggered by local and global group calls, and when prssing M-key in a simplex conference
- - To filter away group calls and conferences: Set "Related to" = UDP 8 instead of "All"
Event description
| Event Owner: | The called station |
|---|---|
| Event type: | 09 - Private Ringing Mode |
| Sub-Event: | N/A |
| When Change to ON: | At the start of incoming private ringing (or call transfer ringing) |
| When Change to OFF: | When the station enters conversation, or ringing stops due to time-out or C-key |
| When Related to: | The calling station |
- Additional information:
- - See also event "01 Audio - Private Ringing"
- Application
- - Additional call indication
- - CCTV control