Difference between revisions of "Program Direct Access Key feature"
From Zenitel Wiki
| Line 22: | Line 22: | ||
|'''Description''': || Program [[DAK]] key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key.<br>Directory number 9541 is used in the menues of the [[Dual Display Station - 1007007000|Dual Display station]] | |'''Description''': || Program [[DAK]] key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key.<br>Directory number 9541 is used in the menues of the [[Dual Display Station - 1007007000|Dual Display station]] | ||
|} | |} | ||
| − | + | <br><br> | |
| − | + | '''Note:''' As from AMC 10.60.3.1 the 784 programming is temporarily stored in the running configuration in RAM, and permanently synchronized to Flash after up to 4 hours. Flash is always synchronized after AlphaPro update (SendChg/SendAll) and before software reset if any pending changes. But there is no sync if sudden power or APC reset. | |
[[AlphaCom Feature List|Back to feature list]] | [[AlphaCom Feature List|Back to feature list]] | ||
Revision as of 00:22, 7 March 2011
| Feature: | Program Direct Access Key |
| Default directory number: | 784, 9541 |
| Feature number: | 32 |
| Parameter 1: |
0 = Standard program DAK 0 (784)
|
| Description: | Program DAK key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key. Directory number 9541 is used in the menues of the Dual Display station |
Note: As from AMC 10.60.3.1 the 784 programming is temporarily stored in the running configuration in RAM, and permanently synchronized to Flash after up to 4 hours. Flash is always synchronized after AlphaPro update (SendChg/SendAll) and before software reset if any pending changes. But there is no sync if sudden power or APC reset.