Program Direct Access Key feature

Feature:	Program Direct Access Key
Default directory number:	784, 9541
Feature number:	32
Parameter 1:	0 = Standard program DAK 1 = Append mode 2 = Program diro during connection 4 = Extra digits only 8 = Program event trigger 0 (784) 128 (9541) (Same function as parameter 1 = 0)
Description:	Program DAK key. Dial: <dir.no> <dak-sequence> <DAK-key>, e.g. 784 + 123 + DAK key. Directory number 9541 is used in the menues of the Dual Display station

Note: As from AMC 10.60.3.1 the 784 programming is temporarily stored in the running configuration in RAM, and permanently synchronized to Flash after up to 4 hours. Flash is always synchronized after AlphaPro update (SendChg/SendAll) and before software reset if any pending changes. But there is no sync if sudden power or APC reset.

Back to feature list