Difference between revisions of "Pulsing of RCO (Event Handler)"
From Zenitel Wiki
| Line 9: | Line 9: | ||
Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | ||
| − | + | [[File:Application20.png|left|thumb|500px]] | |
| − | + | <br style="clear:both;" /> | |
| − | | | + | |
| − | + | {{Code2| | |
| − | + | RCO 3 ON 50 | |
| − | + | }} | |
| − | + | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | | | ||
| − | |||
| − | |||
| − | |||
Revision as of 14:48, 31 May 2022
Function required
A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.
Solution
The stations dial an Event Trigger number (feature 85), say number 9533, to pulse the RCO 3 for 5 seconds.
First, assign the stations to UDP group 1.
Second, in AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
Action commands:
RCO 3 ON 50