Difference between revisions of "RCI CHANGED"

Revision as of 11:47, 8 March 2016

RCI_CHANGED		0x0084
$RCIC W1 U1
New RCI pin state reported from exchange. Note: Message is NOT sent automatically from exchange. Must be configured in RCI table as “side effect” of RCI actions. Tip: Send EVENT_REPORT to Event Handler, then you can use a long action string.
1	UINT2	Input number
2	UINT1	Change to state: 0 = pin is off 1 = pin is on

@@ Line 8: / Line 8: @@
 |colspan="5"|'''$RCIC W1 U1'''
 |-
-|colspan="5"|New [[RCI]] pin state reported from exchange.<br\>Note:  Message is NOT sent automatically from exchange.  Must be configured in [[RCI]] table as “side effect” of [[RCI]] actions.   Tip:  Send [[EVENT_REPORT]] to Event Handler, then you can use a long action string.
+|colspan="5"|New [[RCI]] pin state reported from exchange.<br />Note:  Message is NOT sent automatically from exchange.  Must be configured in [[RCI]] table as “side effect” of [[RCI]] actions.   Tip:  Send [[EVENT_REPORT]] to Event Handler, then you can use a long action string.
 |-
 |align=center|1||[[UINT2]]||colspan="3"|Input number
 |-
-|align=center|2||[[UINT1]]||colspan="3"|Change to state: <br\>0 = pin is off<br\>1 = pin is on
+|align=center|2||[[UINT1]]||colspan="3"|Change to state: <br />0 = pin is off<br />1 = pin is on
 |-
 |}