RCI CHANGED
From Zenitel Wiki
| RCI_CHANGED | 0x0084 | 132 | AMC 08.10 | |
|---|---|---|---|---|
| $RCIC W1 U1 | ||||
| New RCI pin state reported from exchange.<br\>Note: Message is NOT sent automatically from exchange. Must be configured in RCI table as “side effect” of RCI actions. Tip: Send EVENT_REPORT to Event Handler, then you can use a long action string. | ||||
| 1 | UINT2 | Input number | ||
| 2 | UINT1 | Change to state: <br\>0 = pin is off<br\>1 = pin is on | ||