View source for RCO - Set Remote Control Output

{{AI}} 
The RCO command is used for controlling [[RCO|Remote Control Outputs (RCOs)]], which is used for operating relays on devices supporting Remote Control Outputs, such as the [[MRBD]] board, the [[FBSAR]] board or the relay in the IP station.

== Syntax ==

 RCO  <RCO logical number>  <ON/OFF>   <Pulse time>

== Example ==

 RCO 10         - The RCO number 10 will follow the event ON and OFF
 RCO 10 ON      – Turns ON the RCO number 10
 RCO 10 ON 25   – Pulse RCO number 10 for 2.5 seconds


== Application example ==
[[Pulsing of RCO (Event Handler)]]


[[Category:Event Handler]]
[[Category:Built-In Action Commands]]