Difference between revisions of "Recall"
From Zenitel Wiki
(→ReCall user interface) |
(→ReCall user interface) |
||
| Line 18: | Line 18: | ||
# Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel | # Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===Hardware and software requiements=== | ===Hardware and software requiements=== | ||
Revision as of 14:42, 31 August 2010
Recall is a function to record a message from a station, and then dispatch the recorded message as a Group Call. The function is used to prevent feedback problems when making groupcalls. The recorded message is a temporary message, which is discarded when the Group Call is finished.
Default directory numbers for "recall" broadcast:
- 9084: Recall to group 1 (all)
- 9085-9088: Recall to groups 2 - 5
To initiate a group call, dial the directory number of the desired group. Press the M-key to start recording. Release M-key to listen to the message. Press 8 to dispatch the message, or C to cancel.
ReCall user interface
ReCall is a function to record a voice message from the station, and then dispatch the recorded message as a Group Call. The recorded message is a temporary message, which is discarded when the Group Call is finished. Simplest sequence is then:
- Dial recall number (e.g. 9084)
- Press M-key
- Record message
- Release M-key, and listen to the recording
- Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel
Hardware and software requiements
Hardware: The recall function can be used on all AMC-IP hardware versions (red or black PCB).
Software: Recall is available from AMC software version 11
License: Recall requires an Audio Messaging license.