ST STATE
From Zenitel Wiki
| ST_STATE | 0x009A | 154 | AMC 10.23 | |
|---|---|---|---|---|
| Response to the GET_ST_STATE message. | ||||
| Current status of a station <br\> Illegal station or no more stations available will return ST_STATE without parameters | ||||
| 1 | UINT2 | 1 -> 552: Station Physical Number | ||
| 2 | NET_OBJ_REF<br\>{ECL_STATION} | Default user Directory Number | ||
| 3 | TEXT16 | Default user Display text | ||
| 4 | UINT4 | State bitmap Bits:<br\>
1: 0 = Free, 1 = Busy <br\> 2: 0 = A station, 1 = B station in communication.(Param 8. describe related station) <br\> 3: 0 = M-rel, 1 = M-pres <br\> 4: 0 = Hook on, 1 = Hook off <br\> (*)5: 0 = privat off, 1 = private on <br\> 6: 0 = no mail, 1 = mail queue <br\> | ||
| 5 | UINT1 | Line State <br\>
0 Board not present <br\> 1 SLI board present, no station <br\> 2 SLI board present, station with failure <br\> 3 Station connected to SLI board <br\> 16 IP station configured, not connected <br\> 17 IP station connected but not authorized <br\> 18 IP station connected and registered OK, auth not required <br\> 19 IP station connected and authorized <br\> 20 IP station connected but no license available <br\> | ||
| 6 | UINT2 | (*)Station RCI bitmap <br\>
1: RCI 1, 0 = off, 1 = on <br\> 2: RCI 2....<br\> | ||
| 7 | UINT2 | (*)Station RCO bitmap <br\>
1: RCO 1, 0 = off, 1 = on <br\> 2: RCO 2....<br\> | ||
| 8 | NET_OBJ_REF | (Only if conn active)Related station in connection. | ||
| 9 | UINT2 | (Only if conn active)Connection reference as given in CONN_STATUS_BC | ||
| 10 | UINT1 | (Only if conn active)CALL status as given in CALL_STATUS_BC | ||
| Response to: | GET_ST_STATE | |||
| (*) | Not implemented yet | |||
Note: This command require an OPC Server license Back to AlphaNet message list