Difference between revisions of "Station ID feature"

Revision as of 23:35, 7 October 2008

Feature:	Display station and system information
Default directory number:	789
Feature number:	54
Parameter 1:	0
Description:	Service code: Dial 789 on a display station to view station and system information. Press M-key to step to new information: 789: First line: Directory number and name. Second line: Area code and exchange name 789 + M: Show physical number and node number 789 + M + M: Show AMC software version 789 + M + M + M: Show IP address of Eth0 and Eth1 (see note below) 789 + M + M + M + M: Show MAC address of the AMC-IP Note: IP address of Eth0/Eth1 is the configured IP addresses, as used by AMCD. The difference is if you use the 7810 function, then the actual IP address used by linux will be different from the configured one until next reset.

@@ Line 12: / Line 12: @@
 |'''Description''': || Service code: Dial 789 on a display station to view station and system information. Press M-key to step to new information:
-*789: Fist line: [[Directory number]] and name. Second line: [[Call remote exchange feature|Area code]] and exchange name
+*789: First line: [[Directory number]] and name. Second line: [[Call remote exchange feature|Area code]] and exchange name
 *789 + M: Show [[physical number]] and [[node|node number]]
 *789 + M + M: Show AMC software version