Difference between revisions of "Station ID feature"

Revision as of 13:14, 8 September 2017

Feature:	Display station and system information
Default directory number:	789
Feature number:	54
Parameter 1:	0
Description:	Service code: Dial 789 on a display station to view station and system information. Press M-key to step to new information: 789: First line: Directory number and name. Second line: Area code and exchange name 789 + M: Show physical number and node number 789 + M + M: Show AMC software version 789 + M + M + M: Show IP address of Eth0 and Eth1 (see note below) 789 + M + M + M + M: Show MAC address of the AMC-IP 789 + M + M + M + M + M: Show own IP address (only for IP stations) Note: IP address of Eth0/Eth1 is the configured IP addresses, as used by AMCD. The difference is if you use the 7810 function, then the actual IP address used by linux will be different from the configured one until next reset.

@@ Line 17: / Line 17: @@
 *789 + M + M + M: Show IP address of Eth0 and Eth1 (see note below)
 *789 + M + M + M + M: Show [[MAC address (AMC-IP)|MAC address]] of the [[AMC-IP]]
+*789 + M + M + M + M + M: Show own IP address (only for IP stations)
 Note: IP address of Eth0/Eth1 is the ''configured'' IP addresses, as used by AMCD. The difference is if you use the [[IP config|7810]] function, then the actual IP address used by linux will be different from the configured one until next reset.
 |}
 [[AlphaCom Feature List|Back to feature list]]