Difference between revisions of "Stream audio from 3rd party"
From Zenitel Wiki
Lennert.werf (talk | contribs) |
|||
| Line 19: | Line 19: | ||
}} | }} | ||
| − | |||
| − | |||
| − | |||
| − | |||
* 165 = '''the Dummy''' | * 165 = '''the Dummy''' | ||
* U8 = '''G.722''' | * U8 = '''G.722''' | ||
* 10.5.101.133 = '''IP Address of PC''' | * 10.5.101.133 = '''IP Address of PC''' | ||
* 4322 = '''UDP port for audio''' | * 4322 = '''UDP port for audio''' | ||
| − | * "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source 10.5.101.30 = '''IP Address of the AlphaCom''' | + | |
| + | From Windows command line, enter: | ||
| + | |||
| + | {{Code|ffmpeg.exe -re -i "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" -ac 1 -acodec g722 -ar 16000 -f rtp rtp://10.5.101.30:4322}} | ||
| + | |||
| + | * "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source | ||
| + | * 10.5.101.30 = '''IP Address of the AlphaCom''' | ||
[[Category:AlphaCom Applications]] | [[Category:AlphaCom Applications]] | ||
[[Category:ICX-AlphaCom Applications]] | [[Category:ICX-AlphaCom Applications]] | ||
Latest revision as of 14:07, 16 February 2024
This article describes how to stream audio from a 3rd party source to the AlphaCom or ICX using an IP Dummy:
- Install Ffmpeg on PC: http://adaptivesamples.com/how-to-install-ffmpeg-on-windows/
- From AlphaPro, create an IP Dummy, e.g. 165, and set codec = G722.
- In AlphaWeb - Filters, open an UDP port for incoming audio, e.g. 4322.
- Trigger the action command:
Action commands:
$VAC L165 U8 '10.5.101.133' W1234 W4322
- 165 = the Dummy
- U8 = G.722
- 10.5.101.133 = IP Address of PC
- 4322 = UDP port for audio
From Windows command line, enter:
ffmpeg.exe -re -i "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" -ac 1 -acodec g722 -ar 16000 -f rtp rtp://10.5.101.30:4322
|
- "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source
- 10.5.101.30 = IP Address of the AlphaCom