Difference between revisions of "TKIS Connections"
From Zenitel Wiki
(Created page with "right|400px left|350px <br style="clear:both;" /> {| border="1" |Ethernet/Power|| 10/100 Mbps Ethernet RJ-45 port for...") |
|||
| Line 1: | Line 1: | ||
[[File:TCIS Connections 1.PNG|right|400px]] | [[File:TCIS Connections 1.PNG|right|400px]] | ||
| − | [[File: | + | [[File:TKIS-2_2.png|left|350px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| Line 17: | Line 17: | ||
'''Note!''' Use cables crimped with ferrules for terminal block connectors | '''Note!''' Use cables crimped with ferrules for terminal block connectors | ||
| − | * When the Turbine | + | * When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. |
| − | * To make the | + | * To make the kit speak its IP address: |
| + | ::- connect a speaker to the speaker output | ||
| + | ::- connect a button to input 1 | ||
| + | ::- press the button after startup | ||
| + | [[File:TKIS2SpeakIP.png|thumb|left|200px]] | ||
| + | <br style="clear:both;" /> | ||
===Power Supply=== | ===Power Supply=== | ||
| − | The Turbine Compact | + | The Turbine Compact Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Compact Kit can be connected to a 24 VDC local power supply. |
===Network Connection=== | ===Network Connection=== | ||
[[File:TCIS-X top.PNG|thumb|left|250px|Turbine Compact top view]] | [[File:TCIS-X top.PNG|thumb|left|250px|Turbine Compact top view]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | There is one RJ-45 port located on the Turbine Compact | + | There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection. |
===Input/Output Connections=== | ===Input/Output Connections=== | ||
| − | There are 6 I/O connection options for the Turbine Compact | + | There are 6 I/O connection options for the Turbine Compact Kit. |
These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | ||
See also [[Turbine Compact Board Connectors]] | See also [[Turbine Compact Board Connectors]] | ||
Revision as of 10:36, 13 October 2016
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W |
| Input/Output | 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Note! Use cables crimped with ferrules for terminal block connectors
- When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the kit speak its IP address:
- - connect a speaker to the speaker output
- - connect a button to input 1
- - press the button after startup
Power Supply
The Turbine Compact Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Compact Kit can be connected to a 24 VDC local power supply.
Network Connection
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection.
Input/Output Connections
There are 6 I/O connection options for the Turbine Compact Kit. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
See also Turbine Compact Board Connectors