Difference between revisions of "Turbine Extended Board Connectors"
From Zenitel Wiki
(→PCB - Front) |
(→PCB - Front) |
||
| Line 1: | Line 1: | ||
| − | =PCB - Front= | + | ==PCB - Front== |
[[File:TFIE Connections.PNG|500px]] | [[File:TFIE Connections.PNG|500px]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | === P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection === | |
:The station can be powered from this port if the line supports Power over Ethernet (PoE). | :The station can be powered from this port if the line supports Power over Ethernet (PoE). | ||
| Line 10: | Line 10: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | === P3: Secondary Power; 24-48VDC === | |
| − | + | === P4: 10-pin plug-on terminal for external connections === | |
[[File:TCIS Connections 6.PNG|thumb|130px|left]] | [[File:TCIS Connections 6.PNG|thumb|130px|left]] | ||
| Line 30: | Line 30: | ||
*Output ratings: 12mA as LED drivers | *Output ratings: 12mA as LED drivers | ||
| − | + | === P5: 6-pin plug-on terminal for external connections === | |
[[File:TFIE Connections 1.PNG|thumb|left|500px]] | [[File:TFIE Connections 1.PNG|thumb|left|500px]] | ||
:Pin 1 COM relay 1 (Common) | :Pin 1 COM relay 1 (Common) | ||
| Line 44: | Line 44: | ||
'''Note!''' In AlphaCom, relay 1 is configured as output 7, and Relay 2 is configured as output 8! | '''Note!''' In AlphaCom, relay 1 is configured as output 7, and Relay 2 is configured as output 8! | ||
| − | + | === P6: Loudspeaker & Electret microphone === | |
[[File:TCIS Connections 7.PNG|thumb|500px|left]] | [[File:TCIS Connections 7.PNG|thumb|500px|left]] | ||
:Pin 1 10W Speaker amplifier + | :Pin 1 10W Speaker amplifier + | ||
| Line 53: | Line 53: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | === J2: [[TA-10|Turbine Relay Module - TA-10]] === | |
| − | + | === J8: Headset/Handset connector === | |
:Pin 1 Offhook | :Pin 1 Offhook | ||
:Pin 2 GND | :Pin 2 GND | ||
Revision as of 12:06, 28 November 2017
Contents
- 1 PCB - Front
- 1.1 P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection
- 1.2 P3: Secondary Power; 24-48VDC
- 1.3 P4: 10-pin plug-on terminal for external connections
- 1.4 P5: 6-pin plug-on terminal for external connections
- 1.5 P6: Loudspeaker & Electret microphone
- 1.6 J2: Turbine Relay Module - TA-10
- 1.7 J8: Headset/Handset connector
PCB - Front
P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection
- The station can be powered from this port if the line supports Power over Ethernet (PoE).
P3: Secondary Power; 24-48VDC
P4: 10-pin plug-on terminal for external connections
- Pin 1 5.3V
- Pin 2 GND
- Pin 3 Button Input or LED Driver
- Pin 4 Button Input or LED Driver
- Pin 5 Button Input or LED Driver
- Pin 6 Button Input or LED Driver
- Pin 7 Button Input or LED Driver
- Pin 8 Button Input or LED Driver
- Pin 9 600 ohm balanced line out +
- Pin 10 600 ohm balanced line out -
- Output ratings: 12mA as LED drivers
P5: 6-pin plug-on terminal for external connections
- Pin 1 COM relay 1 (Common)
- Pin 2 NO relay 1 (Normal Open)
- Pin 3 NC relay 1 (Normal Closed)
- Pin 4 COM relay 2(Common)
- Pin 5 NO relay 2 (Normal Open)
- Pin 6 NC relay 2 (Normal Closed)
- Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
Note! In AlphaCom, relay 1 is configured as output 7, and Relay 2 is configured as output 8!
P6: Loudspeaker & Electret microphone
- Pin 1 10W Speaker amplifier +
- Pin 2 10W Speaker amplifier -
- Pin 3 Electret Microphone +
- Pin 4 Electret Microphone -
J2: Turbine Relay Module - TA-10
J8: Headset/Handset connector
- Pin 1 Offhook
- Pin 2 GND
- Pin 3 PTT
- Pin 4 Handset Mic Positive
- Pin 5 Handset Mic Negative
- Pin 6 Headphone Positive
- Pin 7 Headphone Negative
- Pin 8 Line In Positive
- Pin 9 Line In Negative