Revision as of 13:38, 4 October 2021

Release info

This document provides the release notes for VSF-Fortitude6 6.4 with incremental bug fix releases. The release notes for VSF-Fortitude6 6.4 describe new features, improvements and issues fixed after VSF-Fortitude6 6.2.3.1.

Name: VSF-Fortitude6
Description: VSF-Fortitude6 is a firmware for IP Desk Master -V2, IP Flush Master -V2 and IP-CROR.

The firmware is delivered in two different files:

vsff6-6.4.3.x - Used for standard in-field upgrades
vsff6-prod-6.4.3.x - Used in production- and recovery upgrades.

Version: 6.4.3.0
Date: 05.10.2021
Status: General Availability
Compatibility: IP Desk Master V2 and IP Flush Master V2 and IP-CROR are compatible with Edge, SIP, ICX and AlphaCom systems.

VSF-FORTITUDE6 6.2.3.0

New Features

DRES-70 ONVIF profile S support

The devices now have ONVIF profile S support and capabilities similar to video devices. Device is not listed as ONVIF conformant as that is only possible for real video devices. Device is streaming video that show JPEG Zenitel logo of Zenitel using 1 FPS to provide compatibility with various VMS systems. Maximum RTSP stream count for non video devices is now 1 microphone audio, 1 JPEG video and 1 backchannel audio. RTSP PLAY will respond with 453 "Not Enough Bandwidth" if that limit is breached. Port 80 is used for ONVIF.

Report DAK as Digital Input is currently not supported for this platform.

DRES-43 ONVIF audio backchannel

All devices which support ONVIF, with the exception of TCIV, now support the ONVIF audio backchannel. This enables the ONVIF VMS client to send audio to the Zenitel IP device.

DRES-5 Call statuses reported as DeviceIO in ONVIF

Devices now support reporting the following states as input signals through DeviceIO in ONVIF:

In Conversation
Ringing (outgoing and incoming)
In call queue (ICX-AlphaCom mode only)

This behavior is disabled by default and needs to be enabled through device web first.

Improvements

RED-46 IPv6 is supported in SIP mode

MTN-3350 ICX-AlphaCom server's IP is now shown in device info menu when device is not connected

If IP address of the ICX-AlphaCom server was configured, but not connected to ICX-AlphaCom server, IP address 0.0.0.0 would show in device info on the device itself. This is now fixed. The IP of the ICX-AlphaCom server is displayed on the device even if it has lost connection to the ICX-AlphaCom server.

Issues fixed

MTN-3180 IP flush master now only shows 1 relay in configuration

Before there was incorrect option to select up to 3 relays but it is only 1 relay that is actually existing on device.

MTN-3334 TLS 1.1. support over https is removed from devices

MTN-3343 Set time manually has been fixed for IP Desk Master V2 devices in Edge and SIP mode

MTN-3352 Issue with headset on IP Desk Master-V2 is now fixed

If headset on the IP Desk Master-V2 was used, the headset would not be detected after use of the handset. This is now fixed.

MTN-3355 The three inputs on the PCB of the IP Desk Master-V2 are now supported

Difference between revisions of "VSF-Fortitude6 6.4 Release Notes"

From Zenitel Wiki