Wake-up Calls
From Zenitel Wiki
Wake-up Calls
This feature can be used as a wake-up call, or to remind you of an appointment. You enter a wake-up time on your station, and when the time is reached, the station rings. The ringing tone stops when you press a key on the station, or if you lift the handset.
By default, if you do not answer the call, the station will stop ringing after 2 minutes. It will call again up to 5 times, with 5 minutes between each call.
- To enter the wake-up time: Dial 7883, enter the time (hour, minutes), enter the day (day, month) or press M if it is within 24 hours.
- To delete a wake-up time set previously: Dial 7883 + M.
= Additional Information
- Wake-up can be programmed up to 10 months ahead.
- You can register only one wake-up time per station. If you program a new wake-up call, it will replace the first one.
- The wake-up time is only for one specific date - you can not program a wake-up that will be repeated automatically every day.
- The exchange can register up to 200 wake-up calls.
- The wake-up takes place no later than one minute after the programmed time.
- Wake-up parameters (ringing time, time between calls, number of repetitions), can be changed using AlphaPro.
Software
- AMC 06.00 and later