Actions

Busy Override and Ringing Override (Zenitel Connect)

From Zenitel Wiki

Introduction

Busy Override and Ringing Override allow a user to force a connection to another device, even when the called party is already engaged in a call or when the call is still ringing. When Busy Override is used, the existing call is terminated and replaced by the override call.

  • Busy Override allows a user to interrupt an ongoing call and immediately connect to the called party. The existing call is terminated.
  • Ringing Override allows a user to connect immediately while the target device is ringing, before the call is answered.

Busy Override cannot be used on devices that are transmitting or receiving a Broadcast with Emergency priority.

Configuration

The override functionality is configured in the Call Service settings for an individual device or a group of devices.

The following override options are available:

  • When callee is busy – Enables Busy Override.
  • When call is ringing – Enables Ringing Override.

Both options can be enabled simultaneously.

Enabling Override functionality


Operation

On Zenitel devices equipped with a keypad, override is activated by pressing the M-key while the destination device is busy or ringing.

On ITSV devices, override is activated by pressing the * (star) key while the destination device is busy or ringing.

Note icon Override cannot be assigned to a DAK key.


Requirements

Available from Zenitel Connect 1.6.0 and later.