DAK-48 Unit for CRM IV Station
From Zenitel Wiki
|
This product is discontinued! |
CRM-IV is replaced by CRM V - Control Room Master
Description
By adding one D48 Module to the CRM-IV Main Module you will get 48 more single-touch keys. Two D48 Modules can be connected to one Main Module. Station numbers/features can be programmed on each of the keys. To activate the use of the single-touch keys, they must be enabled from AlphaPro. Additional Information:
- The single-touch key programming for the CRM IV station uses DAK tables for unused stations in the system. In the DAK programming for the CRM IV station you set forwarding to the tables you are using.
- Key 1 - forwarding to the first unused station’s DAKs, giving access to 10 single-touch keys
- Key 2 - forwarding to the next unused station, giving access to another 10 keys, etc.
- After enabling, the Info and Name key functions are available on single-touch keys 9 and 10, 19 and 20, 29 and 30, etc.
LEDs in Single-touch Keys
Each single-touch key has two LEDs, one red and one green. Each LED can have continuous, flashing or fast flashing light. There is no LED indication after the autoload. The LED indication pattern is very flexible; each LED for each key can be programmed to give the indication you want in defined situations. For example, you can program the station so that the green LED on a key:
- Flashes when there is a Call Request from the allocated station.
- Is steady on during conversation.
Connection
The D48 Module is connected to the Main Board in the Main Module via a 34-pole connector. The Main Board can have two D48 Units connected. The cable is provided with the D48 Unit. The numbering of the keys depends on which connector you use: – J3: keys 5 - 52 – J4: keys 53 - 100.