Dynamic group inclusion (Event Type)

This event type is not supported in official firmware!

Event description

Event Owner:	Initiator of group call.
Event type:	38 - Dynamic group inclusion
Subevent:	see list below
When change to ON:	see list below
When change to OFF:	see list below
When related to:	The station/group to include. (dirno).

Additional information

0 = ON:  Station/group is included to the group. (Will also be reported for the initial group)
    OFF: Station/group is toggled out of the group. (Will also be activated when disconnecting group call)
1 = ON:  Group/station snatched by initiator with higher call priority.
    OFF: ----Not used
2 = ON:  Station/group is busy
    OFF: ----Not used
3 = ON:  Station/group is not available, station down, wrong group programming (no stations in the group).???
    OFF: ----Not used
4 = ON:  Audio active in group
    OFF: No audio in group
10= ON:  ----Not used
    OFF: Dynamic Group Call end (Used for general cleanup of indication)

Available from alphasys 11.3.x.x