Genetec Sipelia - ICX-AlphaCom integration
From Zenitel Wiki
Contents
Introduction
Genetec has developed a Plug-in called Sipelia which provides an interface from its Security Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode.
Sipelia
Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
ICX System
The interconnection between ICX-AlphaCom and Sipelia is a SIP-trunk. The only further programming which needs to be done in AlphaPro is to define directory numbers for feature 81 or 83. Association of cameras to intercom stations is in the Security Center and does not need any programming in AlphaPro.
AlphaCom XE
The interconnection between AlphaCom XE and Sipelia is SIP-trunk. The only further programming which needs to be done in AlphaPro is to define directory numbers for feature 81 or 83. Association of cameras to intercom stations is in the Security Center and does not need any programming in AlphaPro.
SIP-Stations
Zenitel devices can also be put in SIP-mode and directly register to the Sipelia. Video from TCIV+ stations can be shown during the call when the mode is set to H.264. No further setup is required for this.
Video from Zenitel Devices
H.264
Video from TCIV+ stations registered directly with Sipelia can be shown during the call when the mode is set to H.264. No further setup in Sipelia is required for this.
MJPG
MJPEG is supported as from Security Center 5.4.
- Select Vingtor-Stentofon cameras, then TCIV.
Troubleshooting
Audio issues
If you experience missing audio from/to a station, set codec G.722 to have a lower priority than the G.711a and G.711u codecs in the station. To do this, go to SIP Configuration > Account/Call in the Call Settings section
- On software versions 5.1.3.0 and 02.11.3.0, you must enable Advanced configuration mode to change codec priorities