SIP trace
From Zenitel Wiki
The ICX-AlphaCom and AlphaCom XE offers runtime trace and debug logging via the Linux Console. This is intended for debug and on-site trouble shooting of SIP communication between an ICX or AlphaCom, and a SIP device.
ICX-AlphaCom
Log on to the Linux Console via SSH (user: alpha; password: alphacom), and type:
tst-sipd
|
A few simple input commands are implemented, type single letters;
0,1,2,3,4,5,6,7: Set tracelevel.
0: Fatal errors only
4: SIP/AlphaNet message trace (default)
7: All internal debug trace also
l: list active calls
h: This text
To do a SIP trace you normally choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on the ICX) and the intercom application.
See video:
AlphaCom XE
Log on to the Linux Console via SSH (or telnet on AMC 10) (user: alpha; password: com), and type:
tst -s /tmp/sipd_trace
|
A few simple input commands are implemented, type single letters;
0,1,2,3,4,5,6,7: Set tracelevel.
0: Fatal errors only
4: SIP/AlphaNet message trace (default)
7: All internal debug trace also
l: list active calls
h: This text
To do a SIP trace you normally choose level 4. You will see all SIP messages on the SIP trunk, as well as the internal messages between the SIPd (the internal SIP server running on the AMC-IP card) and the AMCd (the intercom application).
See video: