Zenitel Connect Pro 1.5 - Release Notes
From Zenitel Wiki
- Previous Release - Zenitel Connect Pro 1.4 - Release Notes
This article provides the release notes for Zenitel Connect Pro running on the ICX-510 hardware or in a Virtual Environment. The release notes for ZCP 1.5.x describe new features, improvements and issues fixed after ICX 1.4.x.
Contents
- 1 General information
- 2 Version 1.5.0
- 2.1 Release info
- 2.2 New features
- 2.3 Fixes issues
- 2.3.1 ZEN-866 Could not open door on an AlphaCom station from Zenitel Connect Pro
- 2.3.2 ZEN-862 When entering an incomplete or wrong PIN code on TEIV-1+ the tone would not time out
- 2.3.3 ZEN-823 Users might be logged off after a timeout of 30 minutes
- 2.3.4 ZEN-819 Scanning did not always complete
- 2.3.5 ZEN-764 Status of a replaced device was "Not Configured" after reassigning dirno of old device
- 2.3.6 ZEN-650 Hostname change required reboot
- 2.4 Known issues
- 2.4.1 ZEN-1213 System not stable after restore from 1.4.1
- 2.4.2 ZEN-1212 Restore on a system with a different IP-address
- 2.4.3 ZEN-1193 Connect server is not rebooted after factory reset
- 2.4.4 ZEN-1190 Configuration of display settings for TEIV-1+
- 2.4.5 ZEN-1145 Syslog server does not receive data from ZCP running on a VM
- 2.4.6 ZEN-1108 Adding a second network adapter to a VMWare VM
- 2.4.7 ZEN-1098 Call forwarding from call queue to IP-telephony destination
- 2.4.8 ZEN-619 Default network range reappears after upgrade
General information
The Zenitel Connect Pro software is available in four different packages:
- Zenitel_Connect_ICX_1.5.x.swu - Upgrade package for Zenitel Connect Pro running on ICX-510
- Zenitel_Connect_VMware_1.5.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on VMWare
- Zenitel_Connect_VBox_1.5.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on Virtual Box
- Zenitel_Connect_ICX_prod_icx510_1.5.0.zip - Software used for changing an ICX-510 from running ICX-AlphaCom to run Zenitel Connect Pro, or recovery after a system crash.
There is also an excel template file for easy importing: Zenitel Connect Excel Template 1.12
Version 1.5.0
Release info
Name: See "General Information" section
ICX Version: 1.5.0
Date: 05.03.2025
Status: General Availability
Compatibility: Compatible with device software version 9.1.3.2. Compatible with Zenitel PAVA Vipedia-12 running Vipedia SW bundle 5.1.4.0P
New features
- Possibility to add IP-telephony services in Zenitel Connect Pro
- Credentials handling has been expanded and updated
- Added support to initiate Tone test and Button test from Zenitel Connect Pro
- Communication to devices is now encrypted
- Reworked logging system and added syslog
- Node red is released on VM and in preview for ICX 510
Fixes issues
ZEN-866 Could not open door on an AlphaCom station from Zenitel Connect Pro
When the call came from an AlphaCom door station, the door could not always be opened by a Zenitel Connect operator
ZEN-862 When entering an incomplete or wrong PIN code on TEIV-1+ the tone would not time out
The tone will now time out after 4 seconds, and the station will return to idle.
ZEN-823 Users might be logged off after a timeout of 30 minutes
Automatic log off should be after 30 minutes of inactivity. This was 30 minutes after log in. This is now fixed.
ZEN-819 Scanning did not always complete
Scanning for devices would not complete if the page was not in focus. This is fixed.
ZEN-764 Status of a replaced device was "Not Configured" after reassigning dirno of old device
It required a new scan to get the device to show as configured. This is now not necessary anymore.
ZEN-650 Hostname change required reboot
Changing the host name of Zenitel Connect Pro was only visible in the GUI and stored in the database. To make the system use the hostname required a reboot. This is no longer necessary.
Known issues
ZEN-1213 System not stable after restore from 1.4.1
Restoring a backup from earlier release can cause issues, recommend to take a new backup after upgrade
ZEN-1212 Restore on a system with a different IP-address
When restoring a backup the IP address of ZCP needs to be the same as when the backup was done
ZEN-1193 Connect server is not rebooted after factory reset
After a factory reset or upgrade a manual reboot it needed
ZEN-1190 Configuration of display settings for TEIV-1+
It is impossible to configure display settings for TEIV-1+.
ZEN-1145 Syslog server does not receive data from ZCP running on a VM
When syslog is configured, reboot ZCP to make certain that data is sent to the syslog server
ZEN-1108 Adding a second network adapter to a VMWare VM
When a second network adapter is added to an already configured system running on VMware, the original network adapter is no longer available under its configured IP-address. Its configuration becomes ‘Disabled’. The new network becomes Eth0 and has DHCP as configuration.
ZEN-1098 Call forwarding from call queue to IP-telephony destination
Call forwarding of a queued call on time out does not work when the destination should be reached via a IP-Telephony connection
ZEN-619 Default network range reappears after upgrade
For scanning of devices it is possible to add and delete network ranges. For the ICX-510, network range 169.254.0.0/16 is default. After upgrade, this range will re-appear, even when previously deleted.