Difference between revisions of "Auto-attendant"
From Zenitel Wiki
Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
− | [[Image:Auto-attendant.png|thumb|400px|Auto-attendant feature provides voice | + | [[Image:Auto-attendant.png|thumb|400px|Auto-attendant feature provides voice guided menus]] |
The '''Auto-attendant''' feature provides voice guided menus for handling incoming calls. | The '''Auto-attendant''' feature provides voice guided menus for handling incoming calls. |
Revision as of 15:39, 8 September 2010
The Auto-attendant feature provides voice guided menus for handling incoming calls.
- Play a welcome message on incoming telephone calls
- Press a digit to re-route the call
- Auto-transfer if no digits pressed
- Easy to activate:
- To record welcome message: Dial 8180 + 9550 + M. Start recording.
- Example: ”Welcome to Zenitel, press 1 for Marketing department, press 2 for Sales department, press 3 for switchboard, or wait for an answer”
- An Auto-attendant message has to be recorded in advance, or as a part of the demo: Lift the handset of the IP desktop station and dial 8180 + 9550. (If there is an existing message, it will be played, and you can press "0" to delete it, or C if you choose to keep it). Press M to start recording. Press 8 to save.
- Dial 9550 on a station. The auto-attendant message will be played. Now you can:
- Press 1 to get connected to the CRMV (101)
- Press 2 to get connected to the Softclient (105)
- Or wait for 10 seconds and get connected to the CRMV.
Configuration
Directory number 9550 is included by default.
Hardware and license requiements
- Hardware: The auto-attendant feature require AMC-IP hardware version 8000/5 or 8000/6 (Black PCB).
- License: Auto-attendant requires a Basic or Enhanced Audio Messaging license.