Difference between revisions of "Password (IP Stations)"
From Zenitel Wiki
(→Offline Password) |
(→Offline Password) |
||
| Line 19: | Line 19: | ||
=== Offline Password === | === Offline Password === | ||
This setting is available for [[:Category:INCA Stations|INCA Stations]] only. | This setting is available for [[:Category:INCA Stations|INCA Stations]] only. | ||
| − | The Offline password is dialed on the station keypad | + | The Offline password is dialed on the station keypad to get access to the [[INCA - Configuration via the Display Menu|display setup menus]]. Default password is '''1851'''. |
In INCA stations with software version 01.06 and earlier the offline password was '''1234'''. | In INCA stations with software version 01.06 and earlier the offline password was '''1234'''. | ||
Revision as of 12:10, 20 July 2017
The password of an IP Station can be changed by:
- Log into the IP Station
- Select Station Administration > Change Password.
Web Password
The Web Password is the password you need to enter to get access to the web interface of an IP station.
- User: The default username admin can be changed here
- Old Password: Enter the old password for security. Default is alphaadmin
- New Password: Enter a new password
- Confirm New Password: The new password must be confirmed to avoid misprint
Password can only contain numbers and letters, no other symbols allowed.
A factory reset will reset to default password.
Offline Password
This setting is available for INCA Stations only. The Offline password is dialed on the station keypad to get access to the display setup menus. Default password is 1851.
In INCA stations with software version 01.06 and earlier the offline password was 1234.